libpq's event system is designed to notify
registered event handlers about interesting
libpq events, such as the creation or
destruction of PGconn
and
PGresult
objects. A principal use case is that
this allows applications to associate their own data with a
PGconn
or PGresult
and ensure that that data is freed at an appropriate time.
Each registered event handler is associated with two pieces of data,
known to libpq only as opaque void *
pointers. There is a passthrough pointer that is provided
by the application when the event handler is registered with a
PGconn
. The passthrough pointer never changes for the
life of the PGconn
and all PGresult
s
generated from it; so if used, it must point to long-lived data.
In addition there is an instance data pointer, which starts
out NULL
in every PGconn
and PGresult
.
This pointer can be manipulated using the
PQinstanceData
,
PQsetInstanceData
,
PQresultInstanceData
and
PQsetResultInstanceData
functions. Note that
unlike the passthrough pointer, instance data of a PGconn
is not automatically inherited by PGresult
s created from
it. libpq does not know what passthrough
and instance data pointers point to (if anything) and will never attempt
to free them — that is the responsibility of the event handler.
The enum PGEventId
names the types of events handled by
the event system. All its values have names beginning with
PGEVT
. For each event type, there is a corresponding
event info structure that carries the parameters passed to the event
handlers. The event types are:
PGEVT_REGISTER
The register event occurs when PQregisterEventProc
is called. It is the ideal time to initialize any
instanceData
an event procedure may need. Only one
register event will be fired per event handler per connection. If the
event procedure fails, the registration is aborted.
typedef struct { PGconn *conn; } PGEventRegister;
When a PGEVT_REGISTER
event is received, the
evtInfo
pointer should be cast to a
PGEventRegister *
. This structure contains a
PGconn
that should be in the
CONNECTION_OK
status; guaranteed if one calls
PQregisterEventProc
right after obtaining a good
PGconn
. When returning a failure code, all
cleanup must be performed as no PGEVT_CONNDESTROY
event will be sent.
PGEVT_CONNRESET
The connection reset event is fired on completion of
PQreset
or PQresetPoll
. In
both cases, the event is only fired if the reset was successful. If
the event procedure fails, the entire connection reset will fail; the
PGconn
is put into
CONNECTION_BAD
status and
PQresetPoll
will return
PGRES_POLLING_FAILED
.
typedef struct { PGconn *conn; } PGEventConnReset;
When a PGEVT_CONNRESET
event is received, the
evtInfo
pointer should be cast to a
PGEventConnReset *
. Although the contained
PGconn
was just reset, all event data remains
unchanged. This event should be used to reset/reload/requery any
associated instanceData
. Note that even if the
event procedure fails to process PGEVT_CONNRESET
, it will
still receive a PGEVT_CONNDESTROY
event when the connection
is closed.
PGEVT_CONNDESTROY
The connection destroy event is fired in response to
PQfinish
. It is the event procedure's
responsibility to properly clean up its event data as libpq has no
ability to manage this memory. Failure to clean up will lead
to memory leaks.
typedef struct { PGconn *conn; } PGEventConnDestroy;
When a PGEVT_CONNDESTROY
event is received, the
evtInfo
pointer should be cast to a
PGEventConnDestroy *
. This event is fired
prior to PQfinish
performing any other cleanup.
The return value of the event procedure is ignored since there is no
way of indicating a failure from PQfinish
. Also,
an event procedure failure should not abort the process of cleaning up
unwanted memory.
PGEVT_RESULTCREATE
The result creation event is fired in response to any query execution
function that generates a result, including
PQgetResult
. This event will only be fired after
the result has been created successfully.
typedef struct { PGconn *conn; PGresult *result; } PGEventResultCreate;
When a PGEVT_RESULTCREATE
event is received, the
evtInfo
pointer should be cast to a
PGEventResultCreate *
. The
conn
is the connection used to generate the
result. This is the ideal place to initialize any
instanceData
that needs to be associated with the
result. If the event procedure fails, the result will be cleared and
the failure will be propagated. The event procedure must not try to
PQclear
the result object for itself. When returning a
failure code, all cleanup must be performed as no
PGEVT_RESULTDESTROY
event will be sent.
PGEVT_RESULTCOPY
The result copy event is fired in response to
PQcopyResult
. This event will only be fired after
the copy is complete. Only event procedures that have
successfully handled the PGEVT_RESULTCREATE
or PGEVT_RESULTCOPY
event for the source result
will receive PGEVT_RESULTCOPY
events.
typedef struct { const PGresult *src; PGresult *dest; } PGEventResultCopy;
When a PGEVT_RESULTCOPY
event is received, the
evtInfo
pointer should be cast to a
PGEventResultCopy *
. The
src
result is what was copied while the
dest
result is the copy destination. This event
can be used to provide a deep copy of instanceData
,
since PQcopyResult
cannot do that. If the event
procedure fails, the entire copy operation will fail and the
dest
result will be cleared. When returning a
failure code, all cleanup must be performed as no
PGEVT_RESULTDESTROY
event will be sent for the
destination result.
PGEVT_RESULTDESTROY
The result destroy event is fired in response to a
PQclear
. It is the event procedure's
responsibility to properly clean up its event data as libpq has no
ability to manage this memory. Failure to clean up will lead
to memory leaks.
typedef struct { PGresult *result; } PGEventResultDestroy;
When a PGEVT_RESULTDESTROY
event is received, the
evtInfo
pointer should be cast to a
PGEventResultDestroy *
. This event is fired
prior to PQclear
performing any other cleanup.
The return value of the event procedure is ignored since there is no
way of indicating a failure from PQclear
. Also,
an event procedure failure should not abort the process of cleaning up
unwanted memory.
PGEventProc
PGEventProc
is a typedef for a pointer to an
event procedure, that is, the user callback function that receives
events from libpq. The signature of an event procedure must be
int eventproc(PGEventId evtId, void *evtInfo, void *passThrough)
The evtId
parameter indicates which
PGEVT
event occurred. The
evtInfo
pointer must be cast to the appropriate
structure type to obtain further information about the event.
The passThrough
parameter is the pointer
provided to PQregisterEventProc
when the event
procedure was registered. The function should return a non-zero value
if it succeeds and zero if it fails.
A particular event procedure can be registered only once in any
PGconn
. This is because the address of the procedure
is used as a lookup key to identify the associated instance data.
On Windows, functions can have two different addresses: one visible
from outside a DLL and another visible from inside the DLL. One
should be careful that only one of these addresses is used with
libpq's event-procedure functions, else confusion will
result. The simplest rule for writing code that will work is to
ensure that event procedures are declared static
. If the
procedure's address must be available outside its own source file,
expose a separate function to return the address.
PQregisterEventProc
Registers an event callback procedure with libpq.
int PQregisterEventProc(PGconn *conn, PGEventProc proc, const char *name, void *passThrough);
An event procedure must be registered once on each
PGconn
you want to receive events about. There is no
limit, other than memory, on the number of event procedures that
can be registered with a connection. The function returns a non-zero
value if it succeeds and zero if it fails.
The proc
argument will be called when a libpq
event is fired. Its memory address is also used to lookup
instanceData
. The name
argument is used to refer to the event procedure in error messages.
This value cannot be NULL
or a zero-length string. The name string is
copied into the PGconn
, so what is passed need not be
long-lived. The passThrough
pointer is passed
to the proc
whenever an event occurs. This
argument can be NULL
.
PQsetInstanceData
Sets the connection conn
's instanceData
for procedure proc
to data
. This
returns non-zero for success and zero for failure. (Failure is
only possible if proc
has not been properly
registered in conn
.)
int PQsetInstanceData(PGconn *conn, PGEventProc proc, void *data);
PQinstanceData
Returns the
connection conn
's instanceData
associated with procedure proc
,
or NULL
if there is none.
void *PQinstanceData(const PGconn *conn, PGEventProc proc);
PQresultSetInstanceData
Sets the result's instanceData
for proc
to data
. This returns
non-zero for success and zero for failure. (Failure is only
possible if proc
has not been properly registered
in the result.)
int PQresultSetInstanceData(PGresult *res, PGEventProc proc, void *data);
PQresultInstanceData
Returns the result's instanceData
associated with proc
, or NULL
if there is none.
void *PQresultInstanceData(const PGresult *res, PGEventProc proc);
Here is a skeleton example of managing private data associated with libpq connections and results.
/* required header for libpq events (note: includes libpq-fe.h) */ #include <libpq-events.h> /* The instanceData */ typedef struct { int n; char *str; } mydata; /* PGEventProc */ static int myEventProc(PGEventId evtId, void *evtInfo, void *passThrough); int main(void) { mydata *data; PGresult *res; PGconn *conn = PQconnectdb("dbname = postgres"); if (PQstatus(conn) != CONNECTION_OK) { fprintf(stderr, "Connection to database failed: %s", PQerrorMessage(conn)); PQfinish(conn); return 1; } /* called once on any connection that should receive events. * Sends a PGEVT_REGISTER to myEventProc. */ if (!PQregisterEventProc(conn, myEventProc, "mydata_proc", NULL)) { fprintf(stderr, "Cannot register PGEventProc\n"); PQfinish(conn); return 1; } /* conn instanceData is available */ data = PQinstanceData(conn, myEventProc); /* Sends a PGEVT_RESULTCREATE to myEventProc */ res = PQexec(conn, "SELECT 1 + 1"); /* result instanceData is available */ data = PQresultInstanceData(res, myEventProc); /* If PG_COPYRES_EVENTS is used, sends a PGEVT_RESULTCOPY to myEventProc */ res_copy = PQcopyResult(res, PG_COPYRES_TUPLES | PG_COPYRES_EVENTS); /* result instanceData is available if PG_COPYRES_EVENTS was * used during the PQcopyResult call. */ data = PQresultInstanceData(res_copy, myEventProc); /* Both clears send a PGEVT_RESULTDESTROY to myEventProc */ PQclear(res); PQclear(res_copy); /* Sends a PGEVT_CONNDESTROY to myEventProc */ PQfinish(conn); return 0; } static int myEventProc(PGEventId evtId, void *evtInfo, void *passThrough) { switch (evtId) { case PGEVT_REGISTER: { PGEventRegister *e = (PGEventRegister *)evtInfo; mydata *data = get_mydata(e->conn); /* associate app specific data with connection */ PQsetInstanceData(e->conn, myEventProc, data); break; } case PGEVT_CONNRESET: { PGEventConnReset *e = (PGEventConnReset *)evtInfo; mydata *data = PQinstanceData(e->conn, myEventProc); if (data) memset(data, 0, sizeof(mydata)); break; } case PGEVT_CONNDESTROY: { PGEventConnDestroy *e = (PGEventConnDestroy *)evtInfo; mydata *data = PQinstanceData(e->conn, myEventProc); /* free instance data because the conn is being destroyed */ if (data) free_mydata(data); break; } case PGEVT_RESULTCREATE: { PGEventResultCreate *e = (PGEventResultCreate *)evtInfo; mydata *conn_data = PQinstanceData(e->conn, myEventProc); mydata *res_data = dup_mydata(conn_data); /* associate app specific data with result (copy it from conn) */ PQsetResultInstanceData(e->result, myEventProc, res_data); break; } case PGEVT_RESULTCOPY: { PGEventResultCopy *e = (PGEventResultCopy *)evtInfo; mydata *src_data = PQresultInstanceData(e->src, myEventProc); mydata *dest_data = dup_mydata(src_data); /* associate app specific data with result (copy it from a result) */ PQsetResultInstanceData(e->dest, myEventProc, dest_data); break; } case PGEVT_RESULTDESTROY: { PGEventResultDestroy *e = (PGEventResultDestroy *)evtInfo; mydata *data = PQresultInstanceData(e->result, myEventProc); /* free instance data because the result is being destroyed */ if (data) free_mydata(data); break; } /* unknown event ID, just return TRUE. */ default: break; } return TRUE; /* event processing succeeded */ }